T315 Mobile Stage Truck

ST180 is a compact solution reference in the ST Series. It is suitable for early-stage solution evaluation and initial model selection.
This model is suitable for projects with limited site space. It helps with the planning of transport and parking arrangements.
Reference size: approx. 6.0 m × 4.7 m. This makes it easier to quickly judge whether the stage can fit the project site.
During the solution planning stage, the access route and support leg positions should be clarified first to ensure on-site feasibility.
Equipment mounting positions and cable routing channels can be reserved according to the project. This supports the overall arrangement of the display system, stage lighting, audio system, and power supply system.
If the project has higher requirements for stage area, load capacity, or equipment layout, ST180 can be compared with models such as ST315 and ST345.

ST315 uses a hydraulic deployment solution. It is suitable for project configurations that aim to improve on-site deployment efficiency and shorten setup time.
During the requirement stage, the target stage opening and usable height should be clarified. The expected equipment layout range should also be provided to support solution planning.
If power supply and distribution are involved, the power demand and power source type should be confirmed in advance. This helps with system layout and safety calculation.
During the solution planning stage, the movement range and deployment direction of the hydraulic system should be checked to ensure that the site has enough operating space.
If the project later requires a larger stage area or a larger equipment layout, ST315 can be further compared with ST345 Series models.

ST345S is a high-load model in the ST Series. It is suitable for larger events and projects with greater equipment layout requirements.
Compared with ST315 and ST315S, ST345S provides higher load capacity and can support more equipment combinations.
The three-axle configuration makes this model more suitable for carrying heavier stage equipment and supporting longer operating periods.
During the requirement stage, it is recommended to provide the target stage opening, usable height, expected load, and equipment layout range.
If the project has higher requirements for stage area, load capacity, or equipment layout, ST345 and ST345P can also be considered.

S565 is designed for projects with higher requirements for stage space. This model is upgraded in both length and area: the trailer body length is about 15.3 m, and the base stage area is about 168 m², with expansion supported.
The larger stage area makes it easier to arrange stage zones and is more suitable for solutions that require a more spacious layout.
S565 has the same height configuration as S465. Therefore, while keeping the same height level, it provides a larger stage area option. It is suitable for projects with a clear need to increase stage size.

The focus of S455S is not stage area. Its key value is that the power supply system and LED screen are directly integrated into the stage structure. The base stage area is about 82 m², with expansion supported.
For project teams, this integrated design helps reduce temporary external connections and repeated installation work after arrival. The team can spend more time on system commissioning and content presentation, instead of additional on-site configuration and repeated adjustment. Stage deployment and retraction are controlled by hydraulic remote operation, making the operating steps more direct.
For projects that are more sensitive to the installation process and require the power supply system and LED screen to be integrated with the stage, S455S can be compared first.